Why DrizzleX

Others watch the meter. DrizzleX watches the fixture.

Most monitors read the building's master meter or a unit submeter, and see one total. DrizzleX measures each fixture, so you see which one is wasting water and what it costs.

Get a quote or contact

Your property, in numbers.

Tell us a little about your buildings. We’ll come back with the numbers that matter.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

The difference

The bill shows the total.
Never the source.

Water waste is rarely a flood. It's a toilet running unnoticed or unreported for weeks or even months, or a shower left on for hours. The city bill only shows the total.

Floor sensors
Catch the rare flood, after the water escapes.
Meter monitors
See the total, not the source. A long shower blends in with everything else.
DrizzleX
Finds the fixture, prices the waste, and keeps the full history.

Compared

Most tools see the total. DrizzleX sees the source.

If you're comparing options, here's how the main approaches differ.

What it measures
Needs a per-unit water main
Shows which fixture
Catches slow leaks & overuse
Supports actual-use billing
Keeps usage history
Keeps usage history

DrizzleX

Flow at each monitored fixture
Doesn’t need
Yes
Yes, minute by minute
Yes, with no submeters needed
Yes, per fixture
Yes

Floor & moisture
sensors

Water on the floor
No
No
Only once water escapes
No
No
No

Master meter monitors

Total flow at the building's master meter
No. Sits on the building's master meter
No
Shows the total, not the source
No
Building total
Building total only

Unit
submeters

Each unit's total use
Yes
No
Unit total only. A long shower can look normal
No
Unit total
Not by fixture

Toilet-only
devices

Toilets
No
Toilets only
Toilets only
No
Varies by device
Toilets only

Automatic
shutoff valves

Motion (sensor valves) or unit flow (smart shutoffs)
Sensor valves: No. Smart shutoffs: Yes
No
Shuts water off, without showing the cause
No
Smart shutoffs: unit total
No
Here's how the main approaches differ.

You may be comparing: WaterCompass, Shayp and WINT (master meter monitoring); Cal Sub and ION Water (unit submeters); LeakAlertor, H2O Degree and Sensor Industries (toilet-focused devices); and shutoff valves such as the Toilet Scrooge and Flo by Moen.

Shutoff valves

Stop the waste without stopping the flush.

Shutoff valves stop the water but don't tell you why. Motion sensors can fail to turn water on when it's urgently needed, and some end up disabled. Smart shutoffs cut water to the whole apartment. DrizzleX keeps every fixture working, so no one waits for maintenance without their only toilet, and your team sees which fixture is wasting water and what it costs. When residents see you know about a problem before they report it, habits tend to change.

What's included

Answers,
not just alarms.

Built to be 
forgotten.

10-year device warranty and battery guarantee. Low-energy LoRa radio frequency (RF), no Wi-Fi.

Easy enough for 
your own team.

About 15 minutes per apartment.

No plumber, permits or calibration.

The full history, not just a warning.

Minute-by-minute data to decide: repair, replace, or talk to the resident.

Works with 
stacked plumbing.

No submeters needed.

One device, 
any fixture.

3/8" to 2" · no adapters · any orientation

Alerts
ranked by cost.

Your team fixes the most expensive waste first.

Tenant water billing

Submeter every unit, no unit mains needed.

Traditional submeters need a per-unit water main that many older buildings don't have. DrizzleX measures each unit's fixtures and aggregates them into a virtual submeter, so you can bill tenants for actual use.

Bill through your provider, one we refer you to, or in-house. Works with or without RUBS, with minute-by-minute usage history behind every bill.

Proof

Already watching water in buildings like yours

Winstar Properties Logo
Fitch Irick Logo
Freeman Webb Company Logo
PAC Properties logo
Standard Communities Logo
Omninet logo
Westgrove Partners logo
Bozzuto logo
Elit Management Logo
K3 Holdings Logo
K&R Realty Management Logo
AvalonBay Communities Logo
Fred Leeds
Jonathan Rose Companies Logo
Lev Investment

FAQs

Comparing options? Start here.

Still weighing approaches? Send us your building details and we'll show you what fixture-level data would find.

Get Your Estimate

Fixture-level water monitoring measures water flow at individual fixtures, such as toilets, showers and sinks, instead of at a unit submeter or the building's master meter. DrizzleX uses it to show which fixture is wasting water, in which unit, and what it costs.

A water leak sensor detects water once it reaches the floor. DrizzleX is installed inline at the fixture and measures its flow, so it catches the slow leaks and overuse that never reach the floor, like a running toilet.

DrizzleX doesn't need unit mains or installed submeters, because it measures at each fixture. That makes it a fit for older and stacked-pipe buildings where traditional submeters can't be installed.

A DrizzleX installation takes about 15 minutes per apartment, with no plumber, permits or calibration. Your maintenance team can handle it, or DrizzleX can arrange it.

DrizzleX ranks alerts by cost. Urgent leaks get their own email or SMS. Regular reports list every leak still open at the time, and all alerts are visible on the dashboard, so your team works on the most expensive waste first.

Automatic shutoff valves stop water. Motion-sensor valves keep a toilet off until someone is detected, and smart shutoffs cut water to the whole apartment when they detect a large leak. DrizzleX shuts nothing off. It measures flow at each fixture, so your team knows which fixture is leaking or overused, what it costs, and the history behind it, while residents keep working water.

See what your buildings are wasting.

Send six months of water bills and your tenant count. We'll send back an estimate for each building.